Robotics Sportster Flash x2 Podręcznik Użytkownika Pobierz pdf (Strona 15)

Sportster Flash x2 - User’s Guide 11

Communications Software

Note: If you are using the communications software included with your

modem, you can disregard this chapter. However, if you are using your

own communications software, please refer to the software's manual

and this chapter.

Communications software allows you to change settings and issue

commands to your modem.

The software included with your modem is pre-configured for optimal

performance with the Sportster. Refer to the software manual for any

additional information. Be sure to install software after the modem is

installed.

Configuring Your Modem

Some programs allow you to select your modem type from a menu.

Select the appropriate U.S. Robotics Sportster High Speed modem. If

yours is not present, try a Courier Dual Standard, V.32 bis, V.FC, or V.

34.

Other programs require you to enter an initialisation string in the

software Modem Set-up screen. If this is the case, enter the following

string to initialise your modem with the optimal settings for your PC:

AT&F1<Enter>.

These settings include: hardware flow control, a fixed serial port rate,

and full result codes.

If you must use software flow control, enter the following string:

AT&F2<Enter>

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 70 71

Brak uwag

Robotics Sportster Flash x2 Podręcznik Użytkownika Strona 15