Robotics Sportster Flash x2 Podręcznik Użytkownika Pobierz pdf (Strona 16)

Sportster MessagePlus12

How to connect the Modem to the Computer

1. Turn off your computer and any attached devices, such as a

printer.

2. Connect the serial cable to the modem and to the computer.

When looking for your serial port label on the back of your

computer, select COM, MODEM, RS-232, or SERIAL.

DO NOT select AUX, GAME, LPT, or PARALLEL.

Note: Remember which serial port you selected. This

information will be necessary when installing your communications

software.

3. Plug the power adapter into the power jack and into a standard

wall outlet.

4. Plug one end of the phone cord into the telephone jack. It is

labeled with a wall plug icon on the bottom of the case. Plug the

other end into a phone wall jack.

WARNING: The phone jack you’re going to use must

be for an ANALOG phone line. Most office phones are wired

through DIGITAL lines. Be sure you know what type of line

you have. The modem will be damaged if you use a digital

phone line.

5. If you wish to use your modem and phone through the same

phone wall jack, plug your phone's cord into the modem's phone

jack. It is labeled with a phone icon on the bottom of the case.

Use an adapter cable if necessary.

NOTE: You can not use the modem and phone at the same time if

they share the same line.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 69 70

Brak uwag

Robotics Sportster Flash x2 Podręcznik Użytkownika Strona 16